Ford KA

DSC_0888

Into our workshop was this KA which had the problem of the hazards going off randomly whilst driving and wouldn’t stop until ignition is switched off.

DSC_0889

We first disconnected the hazard switch but fault remained.

DSC_0900

 We then removed glovebox to reveal the GEM unit. To gain access to the plugs you have to remove the security cover. DSC_0899

Once access was gained and the plugs removed the trouble was obvious

DSC_0898

The car had previous bodywork done on the front and more signs of water were found in the scuttle

DSC_0891

The customer was lucky in that the water hadn’t got inside the GEM unit so with a good clean all was well.


0 comments

Write a Comment

Fields with * are required